OpenStax Chemistry 2e
Physicians often use disposable test strips to measure the amounts of various substances in a patient’s urine. These test strips contain various , embedded in small pads at various locations along the strip, which undergo changes in upon exposure to sufficient concentrations of specific substances. The usage instructions for test strips often stress that proper is critical for optimal results. This emphasis on read time suggests that kinetic aspects of the chemical reactions occurring on the test strip are important considerations.
The test for urinary glucose relies on a two-step process represented by the chemical equations shown here:
The first equation depicts the oxidation of glucose in the urine to yield glucolactone and hydrogen peroxide. The hydrogen peroxide produced subsequently oxidizes colorless iodide ion to yield brown iodine, which may be visually detected. Some strips include an additional substance that reacts with iodine to produce a more distinct color change.
The two test reactions shown above are inherently very slow, but their rates are increased by special embedded in the test strip pad. This is an example of . A typical glucose test strip for use with urine requires approximately 30 seconds for completion of the color-forming reactions. Reading the result too soon might lead one to conclude that the glucose concentration of the urine sample is lower than it actually is (). Waiting too long to assess the color change can lead to a false positive due to the slower (not catalyzed) oxidation of iodide ion by other substances found in urine.
Flowers, P., Theopold, K., Langley, R., & Robinson, W. R. (2019). Chemistry 2e. Houston, Texas: OpenStax. Accessed for free at https://openstax.org/books/chemistry-2e/pages/1-introduction