OpenStax Chemistry 2e
A number of natural and synthetic materials exhibit selective permeation, meaning that only molecules or ions of a certain size, shape, polarity, charge, and so forth, are capable of passing through (permeating) the material. Biological cell membranes provide elegant examples of selective permeation in nature, while dialysis tubing used to remove metabolic wastes from blood is a more simplistic technological example. Regardless of how they may be fabricated, these materials are generally referred to as semipermeable membranes.
Consider the apparatus illustrated in Figure 1, in which samples of pure solvent and a solution are separated by a membrane that only solvent molecules may permeate. Solvent molecules will diffuse across the membrane in both directions. Since the concentration of solvent is greater in the pure solvent than the solution, these molecules will diffuse from the solvent side of the membrane to the solution side at a faster rate than they will in the reverse direction. The result is a net transfer of solvent molecules from the pure solvent to the solution. Diffusion-driven transfer of solvent molecules through a semipermeable membrane is a process known as osmosis.
When osmosis is carried out in an apparatus like that shown in Figure 1, the volume of the solution increases as it becomes diluted by accumulation of solvent. This causes the level of the solution to rise, increasing its hydrostatic pressure (due to the weight of the column of solution in the tube) and resulting in a faster transfer of solvent molecules back to the pure solvent side. When the pressure reaches a value that yields a reverse solvent transfer rate equal to the osmosis rate, bulk transfer of solvent ceases. This pressure is called the osmotic pressure (Π) of the solution. The osmotic pressure of a dilute solution is related to its solute molarity, M, and absolute temperature, T, according to the equation
where R is the universal gas constant.
If a solution is placed in an apparatus like the one shown in Figure 2, applying pressure greater than the osmotic pressure of the solution reverses the osmosis and pushes solvent molecules from the solution into the pure solvent. This technique of reverse osmosis is used for large-scale desalination of seawater and on smaller scales to produce high-purity tap water for drinking.
Examples of osmosis are evident in many biological systems because cells are surrounded by semipermeable membranes. Carrots and celery that have become limp because they have lost water can be made crisp again by placing them in water. Water moves into the carrot or celery cells by osmosis. A cucumber placed in a concentrated salt solution loses water by osmosis and absorbs some salt to become a pickle. Osmosis can also affect animal cells. Solute concentrations are particularly important when solutions are injected into the body. Solutes in body cell fluids and blood serum give these solutions an osmotic pressure of approximately 7.7 atm. Solutions injected into the body must have the same osmotic pressure as blood serum; that is, they should be isotonic with blood serum. If a less concentrated solution, a hypotonic solution, is injected in sufficient quantity to dilute the blood serum, water from the diluted serum passes into the blood cells by osmosis, causing the cells to expand and rupture. This process is called hemolysis. When a more concentrated solution, a hypertonic solution, is injected, the cells lose water to the more concentrated solution, shrivel, and possibly die in a process called crenation. These effects are illustrated in Figure 3.
Flowers, P., Theopold, K., Langley, R., & Robinson, W. R. (2019, February 14). Chemistry 2e. Houston, Texas: OpenStax. Access for free at: https://openstax.org/books/chemistry-2e
Date Published: April 8, 2015 Publisher: Public Library of Science Author(s): Hans Jørgen Timm Guthe, Marianne Indrebø, Torbjørn Nedrebø, Gunnar Norgård, Helge Wiig, Ansgar Berg, Yoshihiro Fukumoto. http://doi.org/10.1371/journal.pone.0122779 Abstract: The colloid osmotic pressure (COP) of plasma and interstitial fluid play important roles in transvascular fluid exchange. COP values for monitoring fluid balance in healthy and … Continue reading
Research Article: Osmotic Engine: Translating Osmotic Pressure into Macroscopic Mechanical Force via Poly(Acrylic Acid) Based Hydrogels
Date Published: May 30, 2017 Publisher: John Wiley and Sons Inc. Author(s): Lukas Arens, Felix Weißenfeld, Christopher O. Klein, Karin Schlag, Manfred Wilhelm. http://doi.org/10.1002/advs.201700112 Abstract: Poly(acrylic acid)‐based hydrogels can swell up to 100–1000 times their own weight in desalinated water due to osmotic forces. As the swelling is about a factor of 2–12 lower in … Continue reading
Research Article: The Balance of Fluid and Osmotic Pressures across Active Biological Membranes with Application to the Corneal Endothelium
Date Published: December 31, 2015 Publisher: Public Library of Science Author(s): Xi Cheng, Peter M. Pinsky, Paul J Atzberger. http://doi.org/10.1371/journal.pone.0145422 Abstract: The movement of fluid and solutes across biological membranes facilitates the transport of nutrients for living organisms and maintains the fluid and osmotic pressures in biological systems. Understanding the pressure balances across membranes is … Continue reading
Research Article: Unexpected Normal Colloid Osmotic Pressure in Clinical States with Low Serum Albumin
Date Published: July 25, 2016 Publisher: Public Library of Science Author(s): Regina Michelis, Shifra Sela, Teuta Zeitun, Ronit Geron, Batya Kristal, Jaap A. Joles. http://doi.org/10.1371/journal.pone.0159839 Abstract: In clinical states associated with systemic oxidative stress (OS) and inflammation such as chronic kidney disease (CKD), oxidative modifications of serum albumin impair its quantification, resulting in apparent hypoalbuminemia. … Continue reading